Products

3M™ Fastener Adhesives 2353/2353Y

Epoxy adhesives best suited for normal and high-temperature environments with high-torque installations

  • Automotive
3M™ Fastener Adhesives 2353/2353Y

3M™ Fastener Adhesives 2353 (blue) and 2353Y (yellow) are micro-encapsulated, room-temperature curing adhesives that enhance the anchorage of threaded fasteners. They remain dormant until the shearing action of engaging the fastener into a nut or threaded cavity breaks the capsules and allows the adhesive to cure. Typical applications include fasteners for the engine compartment or safety-related parts.

Plastics prone to stress-cracking should not be used in proximity to 3M Fastener Adhesives.

This is a normal temp formula that is designed for applications where the service temperature will not exceed 116°C (240°F).3M 2353 Product Sheet

 

Advantages
  • High torque values on coated fasteners
  • Environmental resistance to heat, automotive fluids, vibration, thermal and mechanical shock
  • Extended shelf life (bulk adhesive and coated fasteners)
  • Controlled re-activity (adhesive activates and cures upon insertion)
  • Re-usability (additional capsules break with each re-insertion)
  • Allows controlled application to fasteners; viscosity can be adjusted to achieve target coating weights
  • Penetrates oil coatings
  • Fast drying
  • Bonds to a broad range of fastener finishes
Performance Results
  • Prevailing In Torque (PIT) 2353/2353Y - 1 ft-lb (1.4 Nm)
  • Break-Loose Torque (BLT) - 41 ft-lbs (55.8 Nm)
  • Break-Away Torque (BAT) Initial - 14 ft-lbs (19.0 Nm)
  • Break-Away Torque (BAT) Heat aging - No change (±10% of initial value)
  • Break-Away Torque (BAT) Cycles - No change (±10% of initial value)
  • Break-Away Torque (BAT) Water immersion - No change (±10% of initial value)
  • Break-Away Torque (BAT) Gasoline immersion - No change (±10% of initial value)
  • Break-Away Torque (BAT) Hot motor oil immersion - No change (±10% of initial value)
  • Break-Away Torque (BAT) Transmission fluid immersion - No change (±10% of initial value)
  • Break-Away Torque (BAT) Anti-freeze immersion - No change (±10% of initial value)
  • Prevailing Out Torque (POT) - 11 ft-lbs (15.0 Nm)
Downloads

Inquire Now

Interested in Using Our Products?

Inquire Now