Nylok® Red Nylon Torq-Patch®

Nylok® Red Nylon Torq-Patch®

NYLOK® Red Nylon TORQ-PATCH® is a self-locking element comprised of nylon permanently bonded onto the threads of a fastener. When the NYLOK® Red Nylon TORQ-PATCH® is engaged, it creates a wedge between the fastener and mating part compressing the nylon and creating metal to metal contact opposite the patch. This metal to metal contact results in a positive resistance to vibration and loosening. Since nylon has great memory characteristics, this locking element can be reused several times.

 

Advantages
  • Reusable/adjustable
  • Exceptional vibration resistance
  • Resistant to lubricants, fuel, hydraulic fluids and most commercial solvents
  • Can be applied to any size or thread configuration of a fastener
  • Bonds to a broad range of fastener finishes
  • Complies with or exceeds IFI, DIN and major OEM specifications
  • Provides a seal for threads
  • Parts are ready for assembly
  • Precise thread coverage on every part
  • Can be applied on external and internal threaded fasteners
  • Is not affected by high humidity conditions
  • Environmentally friendly/non-toxic
  • 180° (standard) or 360° (optional) radial coverage
  • Torque can be adjusted to meet specific applications
  • Cost effective
  • No metal removal to reduce fastener strength or performance
TECHNICAL DATA
  • Color: blue/red (special colors available upon request)
  • Dry Wedge - Immediate locking
  • Temperature Range -56° C (-70° F) to +121° C (250° F)
  • Shelf-Life indefinite
Performance Results
  • Prevailing-On Torque (POT) 5.0 – 10.0 Nm
  • First Removal Prevailing-Off Torque (without preload) min 2.5 – 5.0 Nm
  • Fifth Removal Prevailing-Off Torque (POT) min 1.8 – 2.8 Nm
Manufacturing Specifications
  • MILITARY
    • MIL - DTL - 18240F
    • NAS1283
    • NASM15981
    • NASM25027

  • IFI
    • IFI - 100/107
    • IFI - 124
    • IFI - 524

  • DIN
    • DIN 267 PART 28
Downloads

Nylok® Powder Coating

Nylok® Powder Coating

Nylok® Powder Coating is Nylon 11 permanently bonded to the metal surface. Nylok® Powder Coating provides superior protection from galvanic corrosion between dissimilar metals and offers excellent corrosion protection.

 

Advantages
  • Prevents galvanic corrosion between dissimilar metals
  • Rust prevention
  • Decorative
  • Reusable
  • Extensive range of coverages available
  • Environmentally friendly/non-toxic
  • Applicable to varied metals
  • Does not damage finish on mating parts
  • Resistant to lubricants, fuels, hydraulic fluids and most commercial solvents
  • Durable
  • Complies with major OEM specifications
Technical Data
  • Color: black (special colors available upon request)
  • Temperature Range: -56°C (-70°F) to +121°C (+250°F)
  • Shelf life indefinite
Downloads

3M™ Thread Sealant 4291

3M™ Thread Sealant 4291

3M™ Thread Sealant 4291 is a water-based product designed to be pre-applied to threaded fasteners. It has excellent resistance to automotive fluids and can withstand high temperatures and pressures. Typical applications are threaded fasteners for the engine compartment.

 

Advantages
  • Environmental resistance to heat and automotive fluids
  • Can be used on both pipe and straight heads
  • Extended shelf life (12 months on coated fasteners)
  • Water-based sealants with no VOCs
Performance Results
  • Toluene (room temperature): No leaks
  • Gasoline (room temperature): No leaks
  • Motor oil (300°F/149°C): No leaks
  • Transmission fluid (300°F/149°C): No leaks
  • Anti-freeze (266°F/130°C): No leaks
  • Brake fluid (300°F/149°C): No leaks
  • Diesel fuel #2 (room temperature): No leaks
  • Hot water (200°F/93°C): No leaks
  • Gasoline (room temperature): 150 psi / no leaks
  • Motor oil (300°F/149°C): 150 psi / no leaks
  • Transmission fluid (300°F/149°C): 150 psi / no leaks
  • Anti-freeze (266°F/130°C): 150 psi / no leaks
  • Hot water (200°F/93°C): 150 psi / no leaks
  • 1200+ psi (84+ kg/cm): No leaks
Downloads

Precote® 5

Precote® 5

Precote® 5 is a non-reactive coating used for immediate sealing of cylindrical and conical threads. The coating is dry, tack free, with good adherence and can be used in all kinds of assembly procedures.

 

Advantages
  • Complies with or exceeds major OEM specifications
  • Parts are ready for assembly
  • Precise thread coverage in every part
  • Can be applied on external and internal threaded fasteners
  • Is not affected by high humidity conditions
  • Dry-to-touch and tack free with good adherence
  • Thread friction values are not altered
  • Environmentally friendly/non-toxic
  • Good thermal and chemical resistance
Technical Data
  • Color: white
  • Instantaneous High Pressure Seal
  • Air: -60°C to +160°C (-76°F to +356°F)
  • Motor Oil: +150°C (+302°F)
  • Gear Oil: +150°C (+302°F)
  • Glycol / Water 50/50: +120°C (+248°F)
  • Tap Water: +100°C (+212°F)
  • Brake Fluid: +150°C (+302°F)
  • Fuel: room temperature
  • Diesel (without RME): room temperature
  • Shelf life four years at room temperature
Performance Results
  • Prevailing On Torque (POT): 2.0–3.5 Nm
  • Sealing Properties:
    • Straight / Straight: <15 bar (216psi)
    • Taper / Straight: >50 bar (720psi)
Manufacturing Specifications
  • FIAT
    • FPW.80104

  • FORD
    • ESE M4G208-A2
    • WX 201 WSS M18 P 12-A


  • GM
    • 9985473



  • RENAULT
    • 39.02.010 CATEGORY 1 E

  • SAAB SCANIA
    • STD - 518 447 (814282)
    • STD - 1489 (1351 893 SB)

  • VOLVO
    • STD 1262,2
    • MATERIAL NUMBER 96220
Downloads

Precote® 200

Precote® 200

Precote® 200 is a highly resilient under-the-head sealant with good adhesion to seal the mating surfaces of screws, plugs and rivets. The coating is completely dry and non-tacky. The sealing performance is obtained immediately after assembly.

 

Advantages
  • Dry and tack free coating
  • Can be applied to virtually any headed fastener
  • Captive sealing part
  • Eliminates the need for O-rings and gasket seals
  • Good resistance against water based fluids
  • Reusable at room temperature
  • Environmentally friendly/non-toxic
  • Does not create spider cracks in lens covers
Technical Data
  • Color: blue
  • Temperature Range: -40°C (-40°F) to +100°C (+212°F)
  • Hardness, Shore A: 50-65
  • Tensile Strength: 1.49MPa
  • Elongation: 210%
  • Shelf life 4 years at room temperature
Performance Results
  • Seals up to 500psi
Manufacturing Specifications
  • FORD
    • WSS-M4G365-A/A2
Downloads

Nyplas®

Nyplas®

Nyplas® sealant is a plastisol material pre-applied coating under the heads of a variety of fasteners to provide sealing against water, moisture, dust, air and noise dampening.

 

Advantages
  • Seals/dampens immediately upon assembly
  • No secondary material required
  • Eliminates the need for O-rings, gasket seals and sealant compounds
  • Eliminates leak path
  • Reusable
  • Non-toxic, assembler friendly
  • Will not shrink or dry out with age
  • Meets major OEM specifications
Technical Data
  • Color: black
  • Temperature Range: -40°C (-40°F) to +150°C to (+300°F)
  • Can be applied to virtually any headed fastener
  • Shelf life indefinite
Performance Results
  • Seals up to 500psi
Manufacturing Specifications

  • FORD
    • ESB-M4G70 A OR B
    • WSK-M4G70*

  • GM
    • GM6086M-TYPE 3
    • GM1131M-TYPE D
Downloads

Nyseal®

Nyseal®

Nyseal® is a great gasket alternative, creating a gasket-type seal, preventing leakage of fluids and gases under pressure. The coating is permanently fused on the bearing surface of the fastener. As the screw is seated to its final position against the mating part, the Nyseal® element compresses slightly and fills the void between the bearing surface of the head and the counter sink/counter bore.

 

Advantages
  • Eliminates time-consuming, in-house applications of O-rings, gasket seals and sealant compounds
  • Permanently bonded to the bearing surface
  • Eliminates the leak path
  • Prevents galvanic corrosion between dissimilar materials
  • Reusable
  • Highly durable
  • Will not shrink or dry out from age
  • Screw strength is unaffected
  • Assembly ready
Technical Data
  • Color: green (special colors available upon request)
  • Resistant to most chemicals: alcohol, gasoline, oil, kerosene, diesel fuel and hydraulic fluids
  • Temperature Range: -40°C (-40°F) to +66°C (+150°F)
  • Can be applied to virtually any headed fastener
  • Shelf life indefinite
Performance Results
  • Seals up to 500psi
Manufacturing Specifications
  • FORD
    • WSS-M21P2]7-A5
Downloads

Nyplate®

Nyplate®

Nyplate® coating is a film-forming dispersion with mineral solid lubricants for coating threaded fasteners requiring a high preload on assembly without galling. Nyplate® permits an easy and non-destructive disassembly after exposure to high temperature.

 

Advantages
  • Ideal for preventing galling on stainless steel fasteners
  • Forms a dry-to-touch film
  • Environmentally friendly/non-toxic
  • Best thread friction values in the industry with low deviation
  • Very high maximum temperature resistance (850°C /1292°F)
  • Avoids galling, torque chattering and cold welding
  • Resistant to lubricants, fuels, hydraulic fluids and most commercial solvents
  • Avoids corrosion in the threaded connection
  • Can be applied on all threaded materials including plastics
  • Outstanding reduction of thread forming installation torque
Technical Data
  • Color: black
  • Thread Friction Value: 0.10 - 0.15
  • Temperature Range: -60°C (-76°F) to +850°C (+1292°F)
  • Shelf life four years at room temperature
Performance Results
  • Prevailing On Torque: 3.0–7.0 Nm
  • First Removal (room temperature) Prevailing Off Torque (preload: 40.0 Nm): min. 25.0–30.0 Nm
  • Fifth Removal (room temperature) Prevailing Off Torque: min. 25.0–30.0 Nm
Downloads

Nytorq®

Nytorq®

Nytorq® lubricant film-forming synthetic wax lubricant coats threaded fasteners. Nytorq® lubricant reduces friction and prevents cold welding, and can be used in a wide variety of industrial and manufacturing applications. It is also specially designed for self-tapping threads. The film is dry-to-touch, prevents torque chattering and galling, and enables high clamp loads in a small deviation.

 

Advantages
  • Forms a dry-to-touch film
  • Environmentally friendly/non-toxic
  • Optimal friction values with low deviation
  • Avoids galling, torque chattering and cold welding
  • Can be applied on all threaded materials including plastics
  • Outstanding reduction of thread forming torque
  • Complies or exceeds industry specifications
Technical Data
  • Color: opaque
  • Thread Friction Value: 0.06 - 0.15
  • Temperature Range: -70°C (-94°F) to +120°C (+248°F)
  • Density: 1.0
  • Solvent: Water
  • Shelf life four years at room temperature
Performance Results
  • Prevailing On Torque: < 20 Nm
Manufacturing Specifications

  • FORD
    • WSS-M21P27-A4

  • GM
    • 9986167
Downloads

Nystay®

Nystay®

Nystay® customized fastener retention solution allows the fastener to be held in place during production and transport without affecting the end assembly. Nystay® retention coating eliminates parts and process steps which allows for faster assembly.

 

Advantages
  • Reusable
  • Environmentally friendly/non-toxic
  • Can be applied to various metals
  • Resistant to lubricants, fuels, hydraulic fluids and most commercial solvents
  • Durable
  • Can be applied to both threaded and unthreaded fasteners
  • Temporarily holds fastener in place during fabrication, assembly and transportation
  • Soft enough to allow hand assembly
  • Provides a solution for robotic riveting type production
  • Can be located at any point on fastener length
  • Speeds assembly time
  • Reduces inventory
  • Increases quality control
  • Requires no additional features
Technical Data
  • Color: green (special colors available upon request)
  • Temperature Range: -40°C (-40°F) to +66°C (+150°F)
  • Shelf life indefinite
Manufacturing Specifications
  • GM
    • GMW3666
Downloads
Pages: 1 2 3