Nylok’s pre-applied thread protection/masking products eliminate the need for labor-intensive, costly methods including user-applied caps, plugs, tapes, thread chasing, etc. These processes are perfectly suited to protect against and eliminate the adhesion of electro-deposited primers, coatings, weld spatter, etc. on both internal and external threaded fasteners, while also offering increased lubricity reducing installation friction and tension scatter. Ecoat is used in many manufacturing operations and is very effective in preventing premature rusting of metals however Ecoat is very thick and when allowed to bond to threads makes it very tough to assemble. To prevent Ecoat and/or weld spatter from adhering to the threads a Teflon like coating is applied to the threads. This thread masking prevents any adhesion and allows for easy assemble. Nylok’s Nycote® products are the only products that prevents both Ecoat build up in the threads and weld spatter protection.
NYCOTE®/NYCOTE® PLUS will prevent the adhesion of weld spatter and electrodeposited water-based liquid primers.
Nylok’s patented Nycote® coating process provides an affordable and efficient way of protecting fastener threads from weld spatter and electro-deposited paints, primers and coatings. Nycote® is a non-conductive powder thread coating that can be applied to virtually any fastener to add lubricity and reduce torque versus tension scatter.
Nycote® Plus, our next generation thread protection and masking solution, utilizes Nylok’s enhanced white proprietary fluoropolymer powder thread to provide an affordable and efficient way of protecting fastener threads from weld spatter and electro-deposited paints, primers and coatings. Nycote® Plus can be applied to virtually any fastener to add lubricity and reduce torque versus tension scatter.
Nycote® / Nycote® Plus is widely used in industries such as agricultural, automotive, appliance, electronics, HVAC, machinery, marine, outdoor power equipment, recreation equipment and telecommunications manufacturing.
- Prevents the adhesion of electrodeposited water-based liquid primers and coatings
- Prevents adhesion of weld spatter
- Can be coated to external or internal threaded fasteners
- Guarantees good electrical grounding
- Reduces manufacturing cost by increasing productivity
- Can be applied to virtually any fastener to add lubricity and reduce torque versus tension scatter.
- Shelf-Life indefinite
|Other||BMW DIN 15D8992
Fial Auto 9.57455
Land Rover/Honda RES.22.FP.04
Mercedes-Benz MBN 10 392
Opel ON 2018
Renault IBC Spec
Rolls Royce VW-Audi-Spec